The MFP Solution

The SmartLF SCi 36 MFP scanner with SmartWorks Touch MFP software is a Professional MFP Solution providing a wide format copier capable of handling a variety of colour and monochrome documents up to E-size or A0 size. The 36-inch Professional MFP Solution is capable of copying and scanning large CAD technical drawings or colour office documents of the type used in architecture, engineering & manufacturing, construction, utilities, energy companies, mapping and GIS organisations. Every Professional MFP Solution comes complete with an adjustable high stand that allows the scanner to be positioned above most large format printers. With front-feed and front-retrieve document load and capable of taking any media up to 36 inches (914mm) wide the Professional MFP Solution has all the productive capabilities required by most offices.  A minimal footprint allows this system to be placed against a wall to minimise floor space if desired and for a busy CAD drawing office or architect practice where space can be limited the Professional MFP Solution is the perfect answer.

SmartLF SCi MFP

Maximum Scanning Speed @ 200dpi  monochrome:	13.00 inches/sec
Maximum Scanning Speed @ 200dpi 24bit RGB color:	3.00 inches/sec
SingleSensor Scanning Technology	43,200 pixels for 48-bit colour and 16-bit grayscale data capture
Scanning Resolutions (optical)	100, 200, 300, 400, 600 and 1200 dpi
Maximum Image Width	36 inches (914 mm)
Maximum Document Width	38 inches (965 mm)
Maximum Media Thickness	0.08 inches (2.0 mm) flexible media
Interface	SuperSpeed USB 3.0
Included software	SmartWorks Touch MFP

 

Notes

Thick documents up to 2mm must be flexible. Colortrac does not guarantee quoted speeds for thick media. Thick media should be scanned at reduced speeds to obtain optimal image quality. For heavy and/or thick materials the operator may need to support the document as it enters and exits the scanner. For larger sizes of heavy and/or thick media Colortrac recommend the scanner is placed on a flat surface and the operator supports the document as it enters and exits the scanner. Colortrac recommends the Paper Return Guide is always removed when scanning heavy or thick media. SmartWorks TOUCH MFP is intended for SCi MFP scanners and is not compatible with regular SCi scanners or the SGi scanner.

Typical Applications – 36-inch Professional MFP Solution

• Technical & CAD drawings
• Architecture, Engineering & Construction drawings
• Graphic Design
• Copy Shops
• Utilities & Energy Management
• Facilities Management
• Electronic Document Capture (EDC)

SmartWorks Touch mfp software is developed specifically for SmartLF SCi mfp large format scanners